Outdoor table tennis tables made of polymer concrete

Maillith all-weather table tennis tables made of polymer concrete guarantee long-lasting enjoyment. The special feature of our outdoor table tennis tables is the smooth surface, which has nearly the same ball bounce as an indoor competition table. This gives you an authentic table tennis feeling – that stays the same over decades.

Whether at the swimming pool or at school, Maillith outdoor table tennis tables are wear-resistant and absolutely weather-proof. Rain, sunlight, heat, cold and even frost - all this has no impact on the equipment and the table is always excellent for playing on.

Have a look at our polymer concrete table tennis tables in their different designs.

Our standard table tennis tops are available in the colours:

We will be delighted to produce your all-weather table tennis top in your desired colour. A logo can be incorporated in such a way that it is always protected against any deliberate removal and the elements.

Hardly any time is lost between delivery and the first serve, and the set-up itself is incredibly simple.

It starts with selecting the area where you want to set it up. Our tables are delivered in sections on a pallet and thus can be set up in hard-to-reach places, such as back yards. The installation itself can be performed with simple tools and without any special knowledge in just a short time. Due to the modular construction, the individual elements can easily be replaced at any time.

Polymer concrete boasts excellent material properties. Compared to conventional outdoor table tennis tops made of concrete, stone or other materials, which have been weathering quickly, polymer concrete outdoor table tennis tops offer huge benefits.

All our polymer concrete equipment is produced in our company in Lauterbach. Except some small components for the assembly all others are produced in Europe and here too we guarantee top quality

Proof of the unique weather resistance of our polymer concrete table tennis tables is the approximately 35 year old table tennis top at the Dom school in Fulda. Do you know of a table tennis made from other materials, which is still in such a good condition after such a long time?

The new non-glare playing surface of the Maillith table tennis top provides fun even in intense sunshine. The matte surface of the table prevents annoying light reflections and the players always have an excellent view of the table tennis ball.

Table tennis tables made of polymer concrete consist of mineral fillers bonded by polyester resin. The mass is poured into a mould and then compacted. Our polymer concrete has been measured with almost 4 times greater stability than conventional concrete. As a result, our table tennis tables are as sturdy as a 4-times thick concrete table tennis table.

Our products are basically intended for stationary, permanent assembly; however their modular design facilitates rapid assembly and disassembly. Therefore, you can change the location of the table tennis table, or transport the individual parts to hard-to-reach locations in order to fit the table there.

• The substrate must be firm. Paving stones or asphalt are ideal. But four exposed aggregate concrete panels are also acceptable.
  
  
• You need a floor area of approx. 10 m x 5 m. The classic table tennis table measures 274 x 152 x 76 cm. The rule of thumb says 3 metres behind the table and 2 metres on the sides should be left free, thus leaving you enough clearance around the table.

All parts can be replaced (delivery on request). This includes the parts listed in the explosion drawings, as well as all screws and connecting parts.

We have several different table tennis tables in our range. You can choose between the classic version like the models SOLIDO - with a polymer concrete base and FERO- with a steel base. Both models are also available with "round corners". From us, however, you get weather-proof table tennis tables in round form - RONDO model or in the form of an eight – OCTO model.

The past shows that the tables can easily withstand the elements for several decades. One of the oldest ones known to us can be seen here: references.

The usual stains can be removed with a cloth and water, but also with a high pressure cleaner. Graffiti is best tackled with acetone.

As a foundation, 4 exposed aggregate concrete slabs right under the legs are sufficient. However, a consistently firm substrate like a pavement or asphalt is of course better.

Dedicated amateur players and even pros acknowledge that our polymer concrete tables have much better ball bounce than other outdoor tables and that it even comes very close to that of a competition table.

The assembly is quite simple, but we also offer supply and fit. Click here to see the assemblyvideo.

Where selling is concerned, we rely entirely on our trading partners. If you need more detailed information, please contact us at: Contact

Our table tennis tables are available from 1.500, - Euro depending on the model.

There are no standard requirements for this. For a recreational game, we recommend an area of at least 7 m x 4 m.

All parts are placed on a pallet, which is transported to you by our forwarding company or our own delivery and assembly service.

The heaviest part of all the models is a table half of the SOLIDO A45 or FERO A45 at approx. 180 kg.

Of course, all individual parts can be replaced.

This is no problem with a little bit of manual dexterity and our cost-effective repair set.

The weight of the table alone provides good stability but the delivery package also includes floor anchors.

To achieve the same playing height on both sides, the playing surface should not be levelled but run parallel to the floor.

No equipment is as popular as the good old table tennis table made of concrete in school yards, in recreation parks or swimming pools. But the table tennis tops, usually made of exposed concrete or artificial stone, all have one problem: they may be still standing there immovable, but many of them have not been played on for a long time. The playing surface is weathered and washed out, a green covering has formed, parts have been blown off by frost and the surface just can’t be played on any more.

We have no exact figures but in Germany alone, there are over 7,000 swimming pools and some 45,000 schools, most of which have a concrete table tennis table. Many of them lead a sad existence. Restoring or dismantling them is complex and local councils are afraid of the investment.

Old table tennis tables made of concrete can be repaired at a low cost - with Maillith Renewal Tops. The polymer concrete tops are just placed on the old table, glued to the old table and screwed tightly on the sides if possible.

Learn more about our table tennis Renewal Tops and their easy assembly.
Also ideal for private use, e.g. for self-built table tennis tops made of stone.